1.ZN-C-type is cylinder-elongated of separate sections
2.To overcome the defect that the second-time steam is cooled down before entering the condenser, the condenser is designed to be horizontal.
3.To bring up producing capacity of the equipment, the condenser is designed with expanded area and the heating surface of condense tank jacket is also enlarged.
4.To avoid dead corners in condenser outlet pipe, this equipment is designed with stainless steel ball-shaped cocket.
5.The condenser is also designed with a touch-open hand hole at its bottom in order to dispose of remaining liquid and slag within the tank.
6.The heating jacket of ZN-C has two or three sections, so that it can shut down the upper heating part when liquid level is too low in order to prevent dryness of the wall. The bottom is changed cone-shaped which is easy for cleaning.